GensetPedia200 kVA Diesel Genset
Specifications per Cummins' official "Diesel Generator Set QSB6.7 Series" specification sheet (print code PSBU/009/QSB6.7/Revision-04, 11-2022). Verified via bore x stroke x cylinder-count vs. stated displacement cross-check (107x124mm x 6-cyl = 6.7L, matched exactly). All ratings are Prime only -- no separate Standby rating stated. Same Nov-2022 CPCB II era as Cummins' QSB5.9 series (140-160 kVA) processed separately -- consistent within that print-code family, still distinct from the newer CPCB IV+ X2.6 series. noise_db (75) is the brochure's stated design-compliance ceiling ("<=75 dBA @1m at 75% load"), not a certified per-unit test result. Dimensions/weight are the "Typical Enclosed Genset Dimensions" table figures (full canopy), not the smaller bare engine-only dimensions also listed in the Engine Specification table. Wet weight is NOT monotonic with rating as stated in the source (225 kVA is 2652kg, lighter than 200 kVA's 2703kg) -- recorded as-is per the official document rather than corrected, since this can't be independently cross-checked the way displacement can. Fuel consumption assumes 0.85 specific gravity diesel per the brochure's own footnote.